Glarenergy

Product

2P-HSAT

Horizontal Single Axis Tracker

A dual-row horizontal tracker that follows the sun's east–west path with precision motorization and a low-profile design for maximum stability. Available in two configurations: HSAT 2P and TSAT 1P.

A cross-section of the tracker: a pile driven into the ground, the torque tube pivot above it, the tilted module plane, and the single-point linear actuator arm.MODULE PLANETORQUE TUBE PIVOTLINEAR ACTUATORPILE FOUNDATION

Configuration

One platform, two configurations.

Both configurations share the same drive, control and protection behaviour. Only the module arrangement and axis differ.

2P — HSAT

Module arrangement
Two modules in portrait
Axis
Horizontal single axis
Slope tolerance
10% N–S / 10% E–W
Layout
Shared drive, efficient land use

Design features

Built for the conditions a plant actually meets.

Higher energy yield

Following the sun keeps modules at a productive angle from morning through afternoon.

Intelligent tracking

Astronomical calculation with backtracking removes row-to-row shading at low sun angles.

Terrain adaptability

The structure accommodates sloping ground in both the north–south and east–west directions.

Wind resilience

Trackers move to a flat stow position when wind conditions require protection.

Bifacial compatibility

Commercial and bifacial modules are both supported on the same platform.

Low maintenance

Drive and controller hardware remain accessible, and coatings resist corrosion.

Assembly and components

What the tracker is made of.

Single-point linear actuator

One drive point turns the torque tube.

24V DC motor

Low-voltage motorization at the drive.

One controller per tracker

Dedicated control hardware on every row.

Ramming / pre-drill / PHC foundation

Approximately 450 piles per MW.

Galvanised / Mg-Zn coating

Anti-corrosion protection on structure.

Up to 100 modules

Tracker length of 50–100 m.

Manufacturing

Our manufacturing facility.

In service

The tracker on site.

Photography of an installed Glarenergy tracker, showing the drive assembly and module arrangement in operating conditions.

A close view of a single two-module-portrait tracker row, showing the torque tube, piers, module cell divisions and the centre seam between the two module rows.

Technology

How the tracker follows the sun.

A fixed-tilt array remains in a single position and reaches peak output only briefly at solar noon. A tracker maintains a productive angle from morning through afternoon — provided its orientation remains accurate. That accuracy is determined by the controller, not by the structure.

Control sequence

Five operations, repeated all day.

  1. 01

    Calculate

    Astronomical algorithms determine solar position for the site.

  2. 02

    Track

    The controller derives the tracker angle required.

  3. 03

    Move

    A single-point linear actuator turns the torque tube.

  4. 04

    Optimise

    Backtracking removes row-to-row shading at low sun angles.

  5. 05

    Protect

    Flat stow in high wind; nighttime stow on schedule.

Yield

Where the additional yield comes from.

The shaded area represents generation a fixed-tilt array does not capture. Over the operating life of a plant, this amounts to 15–25% more energy from the same modules.

A generation curve across one day. The fixed-tilt array produces a narrow peak at solar noon, while the tracker curve is broader from morning through afternoon; the shaded area between them is the additional energy captured.MORNINGMIDDAYAFTERNOONTRACKERFIXED TILT

Terrain and safety

Built for imperfect ground.

Sloping ground and severe weather are handled by the structure and the control system together, without a separate site-specific product.

N–S slope
10%
E–W slope
10%
Rotation range
±45° to ±60°
Extreme wind
0° stow
Wind survival
180 km/h
Nighttime stow
Scheduled
Operating temperature
−15 °C to 60 °C

Communication

Three ways the fleet reports.

Zigbee mesh

Wireless mesh across trackers in a block.

Ethernet

Wired connection into plant networking.

RS485

Serial link for controller-level integration.

Datasheet

Every parameter, one sheet.

Glarenergy single-axis tracker platform — HSAT 2P and TSAT 1P.

Mechanical

Tracking type
HSAT 2P & TSAT 1P
Tracker length
50–100 m
Module number
Up to 100
Ground coverage ratio
>15%
Modules support
Commercial & bifacial
Operating temperature
−15 °C to 60 °C
Foundation
Ramming / pre-drill / PHC
Anti-corrosion
Galvanised / Mg-Zn coated

Electrical

Drive type
Single point linear actuator
Motor type
24V DC motor
Control system
1 controller per tracker

Tracking

Algorithm
Astronomical + intelligent
Accuracy
±2°
Rotation range
±45° to ±60°
Backtracking
Yes (3D optional)
Nighttime stow
Yes
Wind stow
0° at 180 km/h

Communication

Zigbee
Mesh
Ethernet
Supported
RS485
Supported

Contact

Speak with our engineering team.

For tracker supply, technical consultation or partnership enquiries, please use the form or contact us directly.

Discuss your project.

Share your site conditions and capacity, and our engineering team will respond.